Skunk2 06-11 Honda Civic Si Composite Cold Air Intake
SKK343-05-0100
Cena regularna
$641.99 AUD
Available for preorder
Skunk2 drew upon its experience and longstanding technical partnership with championship-winning Compass360 Racing when developing its all-new Cold-Air Intake for the '06-11 Civic Si. The results are the best performing, best fitting intake system available. Skunk2's Cold-Air Intake is manufactured from molded polymer plastic for superior intake air insulation when compared to aluminum as well as for a smooth, continuous taper. When compared to aluminum, the thicker polymer material results in a superior thermal barrier and lower intake air temperatures. Each kit includes a 3.5- in. internal diameter lower tube and a tapered, 3.5- in. to 3.0- in. internal diameter upper tube that connects to the factory throttle body with a high-quality, silicone connector (larger diameter connector for use with Skunk2 throttle bodies or similar sold separately). The two-piece design and supplied MAF sensor adapter allows for compatibility with vehicles utilizing the factory ECU. A silicone coupler featuring a smooth, tapered transition between the two tubes is also included for vehicles equipped with aftermarket engine management systems that don't utilize MAF sensors. In an effort to reduce the possibility of submerging the air filter during wet conditions, Skunk2's design positions the air filter downward-facing for approximately two inches of additional ground clearance when compared to competitors' designs that locate the air filter from the side. That, combined with a design that doesn't require cutting or modifying the factory fender liners, greatly reduces the chances of water entering the intake during wet conditions. Each Cold-Air Intake kit includes relocation hardware for the battery, ECU, fuse box, and cooling system reservoir tank as well as high-quality stainless steel clamps and mounting hardware. Unlike other intake systems, only Skunk2's unique design and brackets allow for the OEM battery to be retained.
- Allows Compatibility w/Vehicles Utilizing Factory ECU
- Special Shaped Silicone Upper Radiator Hose Incl.
- Manufactured From Molded Polymer Plastic
- 2 Piece Design; Incl. MAF Sensor Adapter
- Allows For OEM Battery to be retained
- Connects To Factory Throttle Body
- 3.5 in. To 3.0 in. ID Upper Tube
- Incl. Relocation Hardware
- 3.5 in. ID Lower Tube
- Silicone Coupler
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2006-2011 | Honda | Civic | Si |
Skunk2 drew upon its experience and longstanding technical partnership with championship-winning Compass360 Racing when developing its all-new Cold-Air Intake for the '06-11 Civic Si. The results are the best performing, best fitting intake system available. Skunk2's Cold-Air Intake is manufactured from molded polymer plastic for superior intake air insulation when compared to aluminum as well as for a smooth, continuous taper. When compared to aluminum, the thicker polymer material results in a superior thermal barrier and lower intake air temperatures. Each kit includes a 3.5- in. internal diameter lower tube and a tapered, 3.5- in. to 3.0- in. internal diameter upper tube that connects to the factory throttle body with a high-quality, silicone connector (larger diameter connector for use with Skunk2 throttle bodies or similar sold separately). The two-piece design and supplied MAF sensor adapter allows for compatibility with vehicles utilizing the factory ECU. A silicone coupler featuring a smooth, tapered transition between the two tubes is also included for vehicles equipped with aftermarket engine management systems that don't utilize MAF sensors. In an effort to reduce the possibility of submerging the air filter during wet conditions, Skunk2's design positions the air filter downward-facing for approximately two inches of additional ground clearance when compared to competitors' designs that locate the air filter from the side. That, combined with a design that doesn't require cutting or modifying the factory fender liners, greatly reduces the chances of water entering the intake during wet conditions. Each Cold-Air Intake kit includes relocation hardware for the battery, ECU, fuse box, and cooling system reservoir tank as well as high-quality stainless steel clamps and mounting hardware. Unlike other intake systems, only Skunk2's unique design and brackets allow for the OEM battery to be retained.
- Allows Compatibility w/Vehicles Utilizing Factory ECU
- Special Shaped Silicone Upper Radiator Hose Incl.
- Manufactured From Molded Polymer Plastic
- 2 Piece Design; Incl. MAF Sensor Adapter
- Allows For OEM Battery to be retained
- Connects To Factory Throttle Body
- 3.5 in. To 3.0 in. ID Upper Tube
- Incl. Relocation Hardware
- 3.5 in. ID Lower Tube
- Silicone Coupler
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2006-2011 | Honda | Civic | Si |
Skunk2 06-11 Honda Civic Si Composite Cold Air Intake
SKK343-05-0100
Cena regularna
$641.99 AUD
Skunk2 drew upon its experience and longstanding technical partnership with championship-winning Compass360 Racing when developing its all-new Cold-Air Intake for the '06-11 Civic Si. The results are the best performing, best fitting intake system available. Skunk2's Cold-Air Intake is manufactured from molded polymer plastic for superior intake air insulation when compared to aluminum as well as for a smooth, continuous taper. When compared to aluminum, the thicker polymer material results in a superior thermal barrier and lower intake air temperatures. Each kit includes a 3.5- in. internal diameter lower tube and a tapered, 3.5- in. to 3.0- in. internal diameter upper tube that connects to the factory throttle body with a high-quality, silicone connector (larger diameter connector for use with Skunk2 throttle bodies or similar sold separately). The two-piece design and supplied MAF sensor adapter allows for compatibility with vehicles utilizing the factory ECU. A silicone coupler featuring a smooth, tapered transition between the two tubes is also included for vehicles equipped with aftermarket engine management systems that don't utilize MAF sensors. In an effort to reduce the possibility of submerging the air filter during wet conditions, Skunk2's design positions the air filter downward-facing for approximately two inches of additional ground clearance when compared to competitors' designs that locate the air filter from the side. That, combined with a design that doesn't require cutting or modifying the factory fender liners, greatly reduces the chances of water entering the intake during wet conditions. Each Cold-Air Intake kit includes relocation hardware for the battery, ECU, fuse box, and cooling system reservoir tank as well as high-quality stainless steel clamps and mounting hardware. Unlike other intake systems, only Skunk2's unique design and brackets allow for the OEM battery to be retained.
- Allows Compatibility w/Vehicles Utilizing Factory ECU
- Special Shaped Silicone Upper Radiator Hose Incl.
- Manufactured From Molded Polymer Plastic
- 2 Piece Design; Incl. MAF Sensor Adapter
- Allows For OEM Battery to be retained
- Connects To Factory Throttle Body
- 3.5 in. To 3.0 in. ID Upper Tube
- Incl. Relocation Hardware
- 3.5 in. ID Lower Tube
- Silicone Coupler
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2006-2011 | Honda | Civic | Si |
Skunk2 drew upon its experience and longstanding technical partnership with championship-winning Compass360 Racing when developing its all-new Cold-Air Intake for the '06-11 Civic Si. The results are the best performing, best fitting intake system available. Skunk2's Cold-Air Intake is manufactured from molded polymer plastic for superior intake air insulation when compared to aluminum as well as for a smooth, continuous taper. When compared to aluminum, the thicker polymer material results in a superior thermal barrier and lower intake air temperatures. Each kit includes a 3.5- in. internal diameter lower tube and a tapered, 3.5- in. to 3.0- in. internal diameter upper tube that connects to the factory throttle body with a high-quality, silicone connector (larger diameter connector for use with Skunk2 throttle bodies or similar sold separately). The two-piece design and supplied MAF sensor adapter allows for compatibility with vehicles utilizing the factory ECU. A silicone coupler featuring a smooth, tapered transition between the two tubes is also included for vehicles equipped with aftermarket engine management systems that don't utilize MAF sensors. In an effort to reduce the possibility of submerging the air filter during wet conditions, Skunk2's design positions the air filter downward-facing for approximately two inches of additional ground clearance when compared to competitors' designs that locate the air filter from the side. That, combined with a design that doesn't require cutting or modifying the factory fender liners, greatly reduces the chances of water entering the intake during wet conditions. Each Cold-Air Intake kit includes relocation hardware for the battery, ECU, fuse box, and cooling system reservoir tank as well as high-quality stainless steel clamps and mounting hardware. Unlike other intake systems, only Skunk2's unique design and brackets allow for the OEM battery to be retained.
- Allows Compatibility w/Vehicles Utilizing Factory ECU
- Special Shaped Silicone Upper Radiator Hose Incl.
- Manufactured From Molded Polymer Plastic
- 2 Piece Design; Incl. MAF Sensor Adapter
- Allows For OEM Battery to be retained
- Connects To Factory Throttle Body
- 3.5 in. To 3.0 in. ID Upper Tube
- Incl. Relocation Hardware
- 3.5 in. ID Lower Tube
- Silicone Coupler
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2006-2011 | Honda | Civic | Si |
Why buy from us?
Built by enthusiasts, for enthusiasts – we live and breathe this
Only premium, proven brands – no compromises on quality
Guaranteed fitment – get it right the first time, every time
Personal, knowledgeable support – we treat your build like our own
